Showing posts with label 1 x 9. Show all posts
Showing posts with label 1 x 9. Show all posts

Tuesday, February 11, 2014

Gravity point 4 build update

Build update - Made some changes to the build and lost 2 pounds. See specs below

 Kitchen shot

 A little help from my friend!


On the trail!

Gravity 29er build spec's
Type
Brand
Model
Weight
pct. Of weight
Front End
Fork
Rock shox
Recon Silver TK 29er 100mm
4.5 16.52%
Stem
Azonic
Barreta
0.562 2.06%
Handlebar
Spank
Spoon
0.727 2.67%
Grips
ODI
TLD Lock on
0.25 0.92%
Shift Levers
Shimano
Deore
0.2 0.73%
Front end etc. total 6.239 22.90%

Frame
Saddle Sette Amp 0.529 1.94%
Frame Gravity 29er 4.1 15.05%
Headset Crane Creek Zero 10 0.145 0.53%
Seatclamp KCNC QR 0.05 0.18%
Seatpost
Easton
XA70
0.6 2.20%
Water bottle holder Black Burn competition 0.1 0.37%
Frame Total 5.524 20.27%

Drive Train
Pedals
VP Comp
VP001
0.776 2.85%
Chain
Sram
PC 951
0.7 2.57%
Chainrings
RaceFace
Single Speed 34t
0.1 0.37%
Bash Guard Race Face Light  0.209 0.77%
Bottom Bracket
FSA
Mega XO
0.9 3.30%
Crankset
FSA
Gravity
2 7.34%
Drive Train etc. total 4.685 17.19%

Front Wheel
Front Tire
Continental
XKING 2.2
1.499 5.50%
Tube frt
Tubeless
stans 0.125 0.46%
Front Brake
Hayes
Stroker Trail
0.9 3.30%
Front Wheel
Easton
EA70XC
1.9 6.97%
Front wheel etc. total 4.424 16.24%

Rear Wheel
Rear Tire
Continental
RKING
1.65 6.06%
Tubes rr
Tubeless
Stans 0.125 0.46%
Cassette
Shimano
SLX CS-HG-61 29er Cassette
0.7 2.57%
Rear Brake
Hayes
Stroker Trail
0.9 3.30%
Rear Wheel
Easton
EA70XC
2.4 8.81%
Rear Derailleur
Shimano
SLX
0.6 2.20%
Rear end etc. total 6.375 23.40%
Total 27.247 100.00%

Thursday, September 5, 2013

Gravity Point 3 Frame and Build


Final build comes in just under 30 lbs.

I'm very pleased with the build the frame and bike feel stable but, lively. The rear chain stay for a no name frame is not bad at 17.5 inches not the tuck of some of the name brand bikes but, this frame/bike climbs well and is very fun on fast single track and downhill. Building this bike or better yet putting all the parts together was an absolute pleasure and I'm glad I did it at least once. I did pull some parts from my 26er like the bottom bracket, crank, shifter and derailleur. I probably spent more than I should when I could have purchased a comparable bike for the same or less. But the experience in tuning, fitting etc was my real point.


Parts list

Frame - Gravity Point 3 (Sold off the Tora fork)
Handlebar - Crank Bros low rise Cobalt 3  720 mm
Stem - Truvativ Hussefelt 60 mm
Grips - ODI lock on
Shifter Right - Shimano Deore 9 speed
Bar ends - Titec shorty
Fork - Recon Silver
Brakes - Hayes Stroker 
Rotors - Alligator 180mm frt and 160mm rear
Seat Post - Easton EA70XC 27.2 mm
Seat - WTB Pure V
Wheel Set - Easton EA70XC
Crank set - FSA Gravity 
Bottom Bracket - MegaXO
Pedals - Wellgo flats 
Rear derailleur - Shimano SLX
Cassette - 29er 9 speed Cassette 11-36
Front Chainring - 34t Race Face SS 
Bashring - Race Face 
Chain Guide - Black Spire stinger 
Front Tire - Continental X King 2.2
Rear Tire - Continental Race King 2.2
Front and Rear tubes - Slime Tubes





Some of the local trails





Morning Drive - Foothills consist of lots of hard pack and sand in some areas and loose of hard pack. Some small to mid size rocks I.e. golf ball to softball size.








From the top looking down you cannot  
tell it is about a 75 foot drop off, if not more.
This area is ridden by dirt bikes and mountain bikers. I would guess a lot of the trails had been originally created by dirt bikes.






Entrance to Mr. Toads. There is some good climbs and a very fast single track section that could kick your ass if you are not paying attention.

Left Arm and Left Leg used to brush some speed off instead of using brakes:)

A little raspberry/dirt rash from Mr. Toads brushing up against one of the outside turns in this very fast very short single track going too fast. Hard to explain you have to try it for yourself.